High Temp black, not high temp enough

cuddies
Topic Author
Offline
User

01 Jun 2007 13:26 #145532 by cuddies

High Temp black, not high temp enough was created by cuddies

I sprayed the pipes on my 900 with the highest high temp black I could buy. It's that engine stuff. Anyways, it burned up, smoked, and flaked off within the first 20 seconds. Any ideas as to what to use?

Please Log in or Create an account to join the conversation.

KaZooCruiser
Offline
User

01 Jun 2007 13:39 #145536 by KaZooCruiser

Replied by KaZooCruiser on topic High Temp black, not high temp enough

Hi, see you are getting underway.

I don't think you are going to get very far with engine paint.

I did a search for exhaust temperature, and came up with this site:

monitor probes

Apparently exhaust gas temperature can run as high as 2200 degrees. At least the sensors are rated at that.

:cheer:

Please Log in or Create an account to join the conversation.

kz700rider
Offline
User

01 Jun 2007 14:24 #145539 by kz700rider

Replied by kz700rider on topic High Temp black, not high temp enough

I used grill paint. It worked fine.

Please Log in or Create an account to join the conversation.

KZPens
Offline
User

01 Jun 2007 14:36 #145541 by KZPens

Replied by KZPens on topic High Temp black, not high temp enough

You are probably looking for header paint. "Duplicolor High Heat Paint" or "VHT Flameproof" are probably the easiest to find in Autopartstores, both are showing a header on the spraycan.

Don't mistake them for the engine enamel paint it goes to "only" 500 degrees.

Please Log in or Create an account to join the conversation.

KZ_Rage
Offline
User
Kentucky Bourbon Barrel Ale

01 Jun 2007 15:19 #145545 by KZ_Rage

Replied by KZ_Rage on topic High Temp black, not high temp enough

+1 on the grill paint. Some of the supposed header paints aren't all they are cracked up to be especially on used parts.

1979 KZ1000E1 SOLD!
1984 KZ550F2 SOLD!
2006 ZG1000A6F (Totaled)
2001 ZRX1200R (Sold)
2001 Sprint 955i ST (daily rider)

Please Log in or Create an account to join the conversation.

kawsakiman
Offline
User

01 Jun 2007 15:41 #145549 by kawsakiman

Replied by kawsakiman on topic High Temp black, not high temp enough

grill paint don't last unless it's cured in a oven

someday i will be able to afford my kz habit.

Please Log in or Create an account to join the conversation.

KZ_Rage
Offline
User
Kentucky Bourbon Barrel Ale

01 Jun 2007 16:20 #145555 by KZ_Rage

Replied by KZ_Rage on topic High Temp black, not high temp enough

kawsakiman wrote:

grill paint don't last unless it's cured in a oven

I'm not following you on that one. What kind of oven/temperature are you talking about? I've never had to do that and it has worked well for me. I just warm the bike and shut it off a few times after painting just to avoid the smoke issue of new paint on headers.

1979 KZ1000E1 SOLD!
1984 KZ550F2 SOLD!
2006 ZG1000A6F (Totaled)
2001 ZRX1200R (Sold)
2001 Sprint 955i ST (daily rider)

Please Log in or Create an account to join the conversation.

KZ_Rage
Offline
User
Kentucky Bourbon Barrel Ale

01 Jun 2007 17:41 #145580 by KZ_Rage

Replied by KZ_Rage on topic High Temp black, not high temp enough

Oh and be sure you use 220 grit to rough the surface and be sure it is clean of grease, etc. Like all paint the secret is in the prep.

1979 KZ1000E1 SOLD!
1984 KZ550F2 SOLD!
2006 ZG1000A6F (Totaled)
2001 ZRX1200R (Sold)
2001 Sprint 955i ST (daily rider)

Please Log in or Create an account to join the conversation.

Fossil
Offline
User

03 Jun 2007 14:46 #145947 by Fossil

Replied by Fossil on topic High Temp black, not high temp enough

VHT Flameproof header paint

Attachments:

Please Log in or Create an account to join the conversation.

Jack
Offline
User

05 Jun 2007 08:14 #146491 by Jack

Replied by Jack on topic High Temp black, not high temp enough

KZ_Rage wrote:

Oh and be sure you use 220 grit to rough the surface and be sure it is clean of grease, etc. Like all paint the secret is in the prep.

AMEN to that...

79 KZ 1075 MKll
79 KZ 1500 MKll dragbike
Gone but not forgotten:
3 X 73 Z1's
1 X 74 Z1A
1 X 75 Z1B

Please Log in or Create an account to join the conversation.

Grebnaws Inc.
Offline
User

05 Jun 2007 08:17 #146496 by Grebnaws Inc.

Replied by Grebnaws Inc. on topic High Temp black, not high temp enough

The Krylon bbq grill paint is working for me, but it's only on being used on plastic. It seemed soft for a few days but it hardened as well as any other spray paint. I was going to black my exhaust with it too but maybe I need to look into the header paint instead.

Please Log in or Create an account to join the conversation.

kz700rider
Offline
User

05 Jun 2007 09:38 #146518 by kz700rider

Replied by kz700rider on topic High Temp black, not high temp enough

As long as it is rated for a high enough temp it should be ok (grill paint that is). I used it on a few bikes . It smoked up , cured itself , and looked like the above pic. Im ok with the results.

Please Log in or Create an account to join the conversation.

KZR's Bikes of the Month for 2024

High Temp black, not high temp enough

If you like KZR Please consider making a donation. Thank you.