KZR's Bikes of the Month for 2024

cheap rearsets!

More
11 Mar 2006 22:00 #30238 by wiccadogg
cheap rearsets! was created by wiccadogg
heres my idea for cheap rearsets.
i'm sure it's been done before. if not it should have been.
this is what i did.
i threaded the upper posts that originally held stock driver peg brackets. also threaded a set of freestyle/bmx bicycle foot pegs to match.
the new pegs screw on. original acorn nut was reinstalled, inside of foot peg, using a lock washer to keep pegs secure.



Post edited by: wiccadogg, at: 2006/03/12 01:34
Attachments:

Please Log in or Create an account to join the conversation.

More
11 Mar 2006 22:17 #30239 by wiccadogg
Replied by wiccadogg on topic cheap rearsets!
original shifter had to be bent to get the shape needed.
hole was drilled\threaded for new shifter peg.
i used an old toyota head bolt covered with 3\8 hose and washers.
after shifter peg was installed the excess shifter was cutoff. the inside end of shifter peg bolt was hammered down to prevent bolt from becoming loose.
Attachments:

Please Log in or Create an account to join the conversation.

More
11 Mar 2006 22:25 #30241 by wiccadogg
Replied by wiccadogg on topic cheap rearsets!
on the brake side, the stock brake peddel was cut to size, drilled, threaded.
i used the same style bolt as the shifter peg and hammered down end to prevent bolt from becoming loose.
Attachments:

Please Log in or Create an account to join the conversation.

More
11 Mar 2006 22:32 #30243 by wiccadogg
Replied by wiccadogg on topic cheap rearsets!
i covered the hole at end of brake arm with an 1981 dime
cuz it fit so perfect and i couldnt think of anything else:whistle:

fin
Attachments:

Please Log in or Create an account to join the conversation.

More
11 Mar 2006 22:53 #30251 by dutchz
Replied by dutchz on topic cheap rearsets!
Cool man. I like the idea of using bmx pegs. I would consider something similar because they look cool, but I need pegs that flip up because my bike is kickstart only. I just reversed the footpeg mounting brackets left to right and upside down,then mounted some pegs upside down. Works pretty good as well.

1974 Kawasaki Z1
Stock front hub and rear axle.

Please Log in or Create an account to join the conversation.

More
12 Mar 2006 03:08 #30261 by indykaw77
Replied by indykaw77 on topic cheap rearsets!
Good thinking! The dime is a nice touch.....

Kawasaki Motorcycles...because cars lean th wrong way!

Please Log in or Create an account to join the conversation.

More
12 Mar 2006 05:50 #30294 by rstnick
Replied by rstnick on topic cheap rearsets!
Good ideas. I've been going over different ways to do a cheap set of rearsets. My single mounting bolt for the pegs is a little further forward though, but I have some spare sets of pegs that I put on to move them further back. I'd just need to shorten the shifter/brake levers, similar to what you have done.

I like how this KZ700's pegs and shifter set up:
.

Rob
CANADA

Need a key for your Kawasaki? PM me

1978 KZ650 C2, 130K kms, Delkevic ex, EI, CVK32, PMC easy clutch, ATK fork brace, steering damper, braced swingarm, ZRX shocks, 18" Z1R front wheel.
2000 ZRX1100
2011 Ninja 250R - Wife's
2005 z750s (aka GPz750)
1978 KZ1000 project
Attachments:

Please Log in or Create an account to join the conversation.

More
12 Mar 2006 09:24 #30342 by Kawozaki
Replied by Kawozaki on topic cheap rearsets!
I like this idea alot! I may have some fabbing to do while the head/cylinders are out getting 'freshened-up'!

Please Log in or Create an account to join the conversation.

  • twowheeledterror
  • Visitor
12 Mar 2006 09:31 #30345 by twowheeledterror
Replied by twowheeledterror on topic cheap rearsets!
With a drill, a dremel and some plate you could make folding bike pegs. Just an idea.

Please Log in or Create an account to join the conversation.

More
12 Mar 2006 09:53 #30352 by Kawozaki
Replied by Kawozaki on topic cheap rearsets!
I don't thinks he's plannin' on throwin' the old girl through the twisties like it's some kind of super sport, TWT!!!:lol: ;)

Please Log in or Create an account to join the conversation.

More
12 Mar 2006 10:08 #30358 by btchalice
Replied by btchalice on topic cheap rearsets!
wont the shorter levers require more pressure to baake and shift?

Terry Meyer / Wichita KS
76 kz900 w/1000 motor TWZTD
I am not driving too fast, I'm flying too low.

Please Log in or Create an account to join the conversation.

  • twowheeledterror
  • Visitor
12 Mar 2006 10:09 #30359 by twowheeledterror
Replied by twowheeledterror on topic cheap rearsets!
Kawozaki wrote:

I don't thinks he's plannin' on throwin' the old girl through the twisties like it's some kind of super sport, TWT!!!:lol: ;)


Yeah, true.

I am still in the mindset of my crazy cafe. haha

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum

If you like KZR Please consider making a donation. Thank you.

KZRider is free, but not without cost.

Please consider chipping in a few bucks to help cover the cost of running the KZR servers.