KZR's Bikes of the Month for 2024

dyna s with what coils?

More
18 Mar 2006 11:15 #32222 by 77KZ650
dyna s with what coils? was created by 77KZ650
Will the dyna s ignition work as well with lower resistance coils than the green 3 ohm ones? I have read mixed opinions on here. how much of a range is there for ohms that can be used? any thoughts? thanks
Scott

Post edited by: 77KZ650, at: 2006/03/18 14:49

07 MDP Rookie of the Year
01 ZX-12R street/drag bike. 8.97 @155.7 pump gas, dot tires, no bars, no power adders. top speed in the 1/4: 161MPH

Please Log in or Create an account to join the conversation.

More
18 Mar 2006 12:05 #32227 by Mark Wing
Replied by Mark Wing on topic dyna s with what coils?
I've used all kinds of coils , stock, hot aftermarket and dyna green coils. Thay all worked pretty much the same with the Dyna's the best but they all worked.
Mark

Jesus loves you Everyone else thinks your an ***

77 KZ650 C1 with ZX7 forks, GPZ mono rear, wider 18 police wheels and Yoshimura motor.

Yorba Linda Cal.

Please Log in or Create an account to join the conversation.

More
18 Mar 2006 15:25 #32272 by Jeff.Saunders
Replied by Jeff.Saunders on topic dyna s with what coils?
You really want to try and keep coils to 3.0 ohm minimum with the Dyna-S ignitions or the coils will run hot.

This email address is being protected from spambots. You need JavaScript enabled to view it.
www.z1enterprises.com

Z1 Ent on Facebook,

Please Log in or Create an account to join the conversation.

More
18 Mar 2006 22:44 #32423 by loudhvx
Replied by loudhvx on topic dyna s with what coils?
Dyna puts a limit of 3 ohms on the S. Most likely the output section can't handle the current demanded by lower resistance coils over time.

Please Log in or Create an account to join the conversation.

  • Shoe48
  • Offline
  • User
  • Live each day as it is your last
More
19 Mar 2006 15:08 #32582 by Shoe48
Replied by Shoe48 on topic dyna s with what coils?
and if 2.6 was used is this out of the question ? or just close enogh to get away with it ?? :ohmy:

Please Log in or Create an account to join the conversation.

More
19 Mar 2006 18:35 #32651 by loudhvx
Replied by loudhvx on topic dyna s with what coils?
It's a question of safety margin. When manufacturers design a transistor, they publish the limitations of the parts. They usually allow for a safety margin.

Lets say you have a rope rated at 460 pounds. Sure it will probably hold more, but if you weigh 540 pounds, are you going to use that rope to climb a mountain? (No fat jokes, I chose those numbers for a reason :) )

The Dyna is rated to handle 4.6 amps. You are asking it to handle 5.4 amps. It'll probably work for a while.

Post edited by: loudhvx, at: 2006/03/19 21:36

Please Log in or Create an account to join the conversation.

  • Shoe48
  • Offline
  • User
  • Live each day as it is your last
More
19 Mar 2006 20:47 #32699 by Shoe48
Replied by Shoe48 on topic dyna s with what coils?
Thanks for a very good answer .. I wouldnt think less than 1 amp would make much difference any idea what stock coils are ? I need to get out the meter tomorrow

Please Log in or Create an account to join the conversation.

More
20 Mar 2006 07:19 #32774 by OnkelB
Replied by OnkelB on topic dyna s with what coils?
I´ve been running electronic ignition coils (2.4 - 2.6 ohms) and a DynaS on my 650 for two years now without problems - that being said, I may just have been lucky, new 3.0 ohm Dyna coils are in the mail as we speak.

77 KZ 650 B1, 82 GPz 1100 B2.

Please Log in or Create an account to join the conversation.

More
21 Mar 2006 22:30 #33284 by 77KZ650
Replied by 77KZ650 on topic dyna s with what coils?
Stock is around 2.2 right?

07 MDP Rookie of the Year
01 ZX-12R street/drag bike. 8.97 @155.7 pump gas, dot tires, no bars, no power adders. top speed in the 1/4: 161MPH

Please Log in or Create an account to join the conversation.

More
21 Mar 2006 22:36 #33285 by loudhvx
Replied by loudhvx on topic dyna s with what coils?
77KZ650 wrote:

Stock is around 2.2 right?


Stock for electronic ignition is around 2.4-ish. Stock for points is around 4-ish.

Please Log in or Create an account to join the conversation.

More
22 Mar 2006 18:33 #33518 by 77KZ650
Replied by 77KZ650 on topic dyna s with what coils?
Ok, so my stock coils (points) will work fine, and not hurt the dyna s until I get the "green" coils... Right?
Scott

07 MDP Rookie of the Year
01 ZX-12R street/drag bike. 8.97 @155.7 pump gas, dot tires, no bars, no power adders. top speed in the 1/4: 161MPH

Please Log in or Create an account to join the conversation.

More
22 Mar 2006 19:45 #33567 by loudhvx
Replied by loudhvx on topic dyna s with what coils?
77KZ650 wrote:

Ok, so my stock coils (points) will work fine, and not hurt the dyna s until I get the "green" coils... Right?
Scott

Yes. Nice dog you got there, by the way.

Please Log in or Create an account to join the conversation.

Powered by Kunena Forum

If you like KZR Please consider making a donation. Thank you.

KZRider is free, but not without cost.

Please consider chipping in a few bucks to help cover the cost of running the KZR servers.