metric

Hawghunter
Topic Author
Offline
User

24 Mar 2020 17:12 #821641 by Hawghunter

metric was created by Hawghunter

I have never used metric. Brought a set down to the kz. Before I round off these bolts I want to ask, is this a normal fit. Seems like a lot of play. Threads are very clean, some blaster has soaked in. Torque is not high on these engine bolts. 17 and 29 pounds.

1981 KZ550-A2

touring Red Rocks of Arizona on my KZ Red Rocket

Please Log in or Create an account to join the conversation.

Hawghunter
Topic Author
Offline
User

24 Mar 2020 17:15 #821643 by Hawghunter

Replied by Hawghunter on topic metric

vid 1

1981 KZ550-A2

touring Red Rocks of Arizona on my KZ Red Rocket

Please Log in or Create an account to join the conversation.

Hawghunter
Topic Author
Offline
User

24 Mar 2020 17:16 #821644 by Hawghunter

Replied by Hawghunter on topic metric

vid 2

1981 KZ550-A2

touring Red Rocks of Arizona on my KZ Red Rocket

Please Log in or Create an account to join the conversation.

Hawghunter
Topic Author
Offline
User

24 Mar 2020 17:20 #821645 by Hawghunter

Replied by Hawghunter on topic metric

played when i uploaded it. So I submitted, doesnt show.

1981 KZ550-A2

touring Red Rocks of Arizona on my KZ Red Rocket

Please Log in or Create an account to join the conversation.

M_a_t_t
Offline
Sustaining Member

24 Mar 2020 17:33 #821646 by M_a_t_t

Replied by M_a_t_t on topic metric

I just use the wrench that fits the tightest. I bring out both standard and metric on everything I work on. I end up using them together like its a single set. If a 14 is too small and a 15 is sloppy I try a 9/16 (14.28mm)

Is the video uploaded to youtube and linked here or some other way?

83 KZ1100A (shaft)
17 Versys X 300 abs
81 kz650h1
81 kz750e2
90 Honda CBR600F (brother's)

Please Log in or Create an account to join the conversation.

Nerdy
Offline
Sustaining Member

24 Mar 2020 18:44 #821654 by Nerdy

Replied by Nerdy on topic metric

It's a good idea to use 6-point sockets whenever possible: you'll get a better fit than you will with a 12-point.

Unfortunately most sets are 12-point. If you want 6-point you'll probably need to buy a different set.

~~1979 KZ400~~ Gifted to a couple of nephews
1967 Yamaha YCS1 Bonanza
1980 KZ440B
1981 Yamaha XT250H
1981 KZ440 LTD project bike
1981 GPz550
2013 Yamaha FZ6R

Please Log in or Create an account to join the conversation.

TexasKZ
Offline
Platinum Member

24 Mar 2020 19:01 #821658 by TexasKZ

Replied by TexasKZ on topic metric

Nerdy wrote: It's a good idea to use 6-point sockets whenever possible: you'll get a better fit than you will with a 12-point.

Unfortunately most sets are 12-point. If you want 6-point you'll probably need to buy a different set.

+1
Twelve pointers are great for rounding off corners.

1982 KZ1000 LTD parts donor
1981 KZ1000 LTD awaiting resurrection
2000 ZRX1100 not ridden enough

www.kzrider.com/11-projects/620336-anoth...uild-thread?start=24

Please Log in or Create an account to join the conversation.

hardrockminer
Offline
Sustaining Member

24 Mar 2020 20:13 #821669 by hardrockminer

Replied by hardrockminer on topic metric

You should get a set of 3/8 sockets. The ones most used are 10, 12, 13, 14, 15 and 17 mm. You should also get a set of JIS screwdrivers. Phillips will damage the heads.

I have several restored bikes along with a 2006 Goldwing with a sidecar. My wife has a 2019 Suzuki DR 650 for on and off road.

Please Log in or Create an account to join the conversation.

Nessism
Offline
Sustaining Member

25 Mar 2020 05:03 #821682 by Nessism

Replied by Nessism on topic metric

hardrockminer wrote: You should get a set of 3/8 sockets. The ones most used are 10, 12, 13, 14, 15 and 17 mm. You should also get a set of JIS screwdrivers. Phillips will damage the heads.

10, 12, 14, 17, 19 are most common. Very few 13 and 15 on Japanese motorcycles.

Believe it or not but the Harbor Freight wrenches and sockets are good value for the money.

Ed
Carb O-ring Kits : www.kzrider.com/forum/3-carburetor/61807...-o-ring-kits?start=0

www.kzrider.com/forum/faq-wiki/618026-new-owner-things-to-know

1981 KZ750E2
www.kzrider.com/forum/11-projects/604901...z750e-project-thread

Please Log in or Create an account to join the conversation.

Hawghunter
Topic Author
Offline
User

25 Mar 2020 10:58 #821716 by Hawghunter

Replied by Hawghunter on topic metric

thank you all. My sockets did not come with large enough sizes so I got a set of box and open end wrenches. the box end are 12 point. I will find some larger sockets. .

1981 KZ550-A2

touring Red Rocks of Arizona on my KZ Red Rocket

Please Log in or Create an account to join the conversation.