kz1000st rebuild

Here are an assortment of pics of my project which is basically clean paint replace where possible and rebuild everything.I did the tach and speedo rebuild and will have those pics shortly.Tapered steering bearings ,calipers and mastercylinder disassembled and cleaned ect.I started the project in two halves ,front and back.I did'nt want to take too much apart at one time but am a bit more confident now .I am leaving the motor to do last as I am waiting on a friend who is going to assist in that part .I have some used dyna coils ,dyna ignition ,wiseco 1075 with 10.25-1,2 new tires ,petcock rebuild kit ect.I am trying to match up stainless bolts whever I can or polishing bolts that are not that bad.I found some debris in the base and turned out to be adhesive from the stator and am not sure if I should trust the magnets to stay in place.

Is it possible to post more than one pic at a time ,thanks .

pic3

pic4

pic6

pic6 smaller

pic8

pic9

pic9 resized

pic11

pic15

pic17