Welcome, Guest
Username: Password: Remember me
  • Page:
  • 1

TOPIC:

What jets do I need 17 Apr 2015 15:24 #668434

  • hughes5567
  • hughes5567's Avatar Topic Author
  • Offline
  • User
  • Posts: 2
  • Thank you received: 0
i have a 83 kz750 ltd shaft drive. It has a kerker 4 into 1 but previous owner did not jet. The air box is stock. I need to know if I should jet it and what jets i need. The spark plugs show lean and my pipes are blue. Getting a lot of mixed reviews and don't know what to do.

Please Log in or Create an account to join the conversation.

What jets do I need 17 Apr 2015 17:23 #668451

  • Nebr_Rex
  • Nebr_Rex's Avatar
  • Offline
  • User
  • Posts: 1891
  • Thank you received: 298
DynoJet has the kit you need. Does your bike have Mikuni carbs? If so get the kit for the "82 GPz750.
If it has Keihin carbs go with the chain drive LTD kit. If you have to ask 'what jets?', you will have a
hard time tuning your carbs. It takes more than just jets to get the job done.


.
2002 ZRX1200R
81 GPz1100
79 KZ1000st daily ride
79 KZ1000mk2 prodject
78 KZ650sr
78 KZ650b
81 KZ750e
80 KZ750ltd
77 KZ400/440 cafe project
76 KZ400/440 Fuel Injected

www.dotheton.com/forum/index.php?topic=39120.0


.
The following user(s) said Thank You: hughes5567

Please Log in or Create an account to join the conversation.

What jets do I need 23 Apr 2015 04:57 #669245

  • hughes5567
  • hughes5567's Avatar Topic Author
  • Offline
  • User
  • Posts: 2
  • Thank you received: 0
Thanks for the advice I ordered the jet kit and ended up getting some air filters as well. on a different note, I would like to adjust the cam chain tensioner while I have access to it, but I'm not sure of the peoceedure.

Please Log in or Create an account to join the conversation.

What jets do I need 23 Apr 2015 07:15 #669262

  • SWest
  • SWest's Avatar
  • Offline
  • Sustaining Member
  • 10 22 2014
  • Posts: 22431
  • Thank you received: 2621
You need a manual. Is the jet kit for the 4/1 only? If so, you will need to jet it for pods also.
Steve

Please Log in or Create an account to join the conversation.

  • Page:
  • 1
Powered by Kunena Forum