Welcome, Guest

TOPIC:

kz650b piston ring width spec 07 Dec 2015 15:06 #702333

Nessism
Offline
Sustaining Member
Posts: 7283
Thank you received: 2674

blink543 wrote: .004 wouldn't go in .003 wouldn't go in but .002 was a fit. So is that good? It's pretty tight.

That's a good result, although I'm very surprised the .003" won't go in. You may want to double check by sliding the feeler in by the pin and then turning the piston or sliding the gauge over to the thrust face.

Ed
Carb O-ring Kits : www.kzrider.com/forum/3-carburetor/61807...-o-ring-kits?start=0
www.kzrider.com/forum/forum-index/faq-wi...owner-things-to-know

1981 KZ750E2
www.kzrider.com/forum/11-projects/604901...z750e-project-thread

Please Log in or Create an account to join the conversation.

Last edit: by Nessism.

kz650b piston ring width spec 07 Dec 2015 15:34 #702338

blink543 Topic Author Offline User Posts: 285 Thank you received: 2	Nessism wrote: blink543 wrote: .004 wouldn't go in .003 wouldn't go in but .002 was a fit. So is that good? It's pretty tight. That's a good result, although I'm very surprised the .003" won't go in. You may want to double check by sliding the feeler in by the pin and then turning the piston or sliding the gauge over to the thrust face. Ok Adam james
	Please Log in or Create an account to join the conversation.

Forum

Technical Forums

Engine

kz650b piston ring width spec