Welcome, Guest
Username: Password: Remember me
  • Page:
  • 1
  • 2

TOPIC:

handling 82 gpz750 vs 81 gpz 1100 18 Apr 2015 19:41 #668605

  • baldy110
  • baldy110's Avatar
  • Offline
  • User
  • Posts: 2272
  • Thank you received: 510
I did post it up on KZ1000R.com, they gave me bike of the month in 2012. The link is attached. I did remove items and I was really careful on what I put on it. The ZRX swingarm is a lot lighter than the stock one. The Kerker is way lighter than the stock exhaust. I did remove about 1 pound off the back of the frame when I cut and moved the tail light assembly further back to be flush with the rear fender instead of sticking out. I ditched the stock foot peg brackets and foot pegs and went with aftermarket rearsets and brackets that came off a crashed Yamaha FZR1000 that saved about 10 pounds. I ditched the stock instruments and went with a Koso RX1 gauge. I used a ballistac battery which saved me 6 pounds, all this adds up. I wanted the engine to sit as low as possible so I could remove the top end without removing the entire engine from the frame. The 1100 engine is quite a bit taller and wider than the 750. I have about 1/8" gap between the engine and frame on both sides.
www.kz1000r.com/index.php/botm-2012-141?id=166

Please Log in or Create an account to join the conversation.

Last edit: by baldy110.

handling 82 gpz750 vs 81 gpz 1100 18 Apr 2015 20:43 #668616

  • Randombeat
  • Randombeat's Avatar
  • Offline
  • User
  • 0 to 100 real quick...
  • Posts: 274
  • Thank you received: 23

baldy110 wrote: The 750 is a much better handling machine, lighter and better for around town and twisty roads. But I LOVE the power of the 1100 engine. My solution was to install a GPZ1100 engine into the GPZ750 frame. Now I got the best of both worlds.

l

Baldy, how did you do those wheels? I'm loving the gold w polished lip....
1980 KZ750H LTD-- pods-- vance & hines 4-1 --speedo/tach/blinker/switch deletes -- brat style

Please Log in or Create an account to join the conversation.

handling 82 gpz750 vs 81 gpz 1100 19 Apr 2015 16:11 #668755

  • baldy110
  • baldy110's Avatar
  • Offline
  • User
  • Posts: 2272
  • Thank you received: 510
I sandblasted the wheels taped off what I did not want painted then sprayed them with POR 15 oldsmobile gold engine paint. That stuff is tuff, I painted the swingarm with their aluminum engine paint and about 6 weeks later the rear brake master cylinder started leaking and soaked the swingarm with brake fluid for about 12 hours before I discovered it. I thought the paint was going to just peel off but when I cleaned it up nothing came off the paint was still good as new.

Please Log in or Create an account to join the conversation.

  • Page:
  • 1
  • 2
Powered by Kunena Forum