KZ750 chopper

KZ750 chopper 08 May 2013 20:45 #586415

rstnick Offline User Posts: 4365 Thank you received: 373	A 750 shaft drive motor? I know the large KZ Shafts have been converted to chain, not sure on the 750/4s, but good chance it can be done. Rob CANADA Need a key for your Kawasaki? PM me 1978 KZ650 C2, 130K kms, Delkevic ex, EI, CVK32, PMC easy clutch, ATK fork brace, steering damper, braced swingarm, 18" Z1R front wheel. 2000 ZRX1100 2011 Ninja 250R 2005 z750s
	Please Log in or Create an account to join the conversation.

KZ750 chopper 08 May 2013 22:35 #586451

Jrbrownie00 Offline User Posts: 122 Thank you received: 9	cool looking bike. I notice you have pods, did you jet? Does it run well with the pods? 82' kz750 ltd.
	Please Log in or Create an account to join the conversation.

KZ750 chopper 09 May 2013 02:24 #586511

yeekim Topic Author Offline User Posts: 72 Thank you received: 2	Hi! The donor is this and the "stick" is clearly visible: If successful, will have a lot of spares The pods: made from TwinAir and glued to fit over metal cones. From previous experience, I don't trust the metal ones. Have slight delay on lower revs. Jetting is a tricky question: Ex nihilo nihil fit!
	Please Log in or Create an account to join the conversation. Last edit: by yeekim.

KZ750 chopper 28 May 2013 12:15 #589580

yeekim Topic Author Offline User Posts: 72 Thank you received: 2	Hello! I'v been riding a lot, still working with low revs issue The donor I wrote earlier is a KZ750P- first I was about to wreck it but now...... Made also DIY dB killers Ex nihilo nihil fit!
	Please Log in or Create an account to join the conversation. Last edit: by yeekim.

KZ750 chopper 03 Sep 2013 16:27 #604651

yeekim Topic Author Offline User Posts: 72 Thank you received: 2	Hoi! So it's been a long time since last post. Got the new donor bike- KZ 750 P1 As the engine condition looks better than the H3 one, I'm about breaking the law: both are KZ 750's and the official papers indicate it too- so the licence plate may travel VIN can be re..... Maybe will make a new topic in "projects" greetings Ex nihilo nihil fit!
	Please Log in or Create an account to join the conversation.

KZ750 chopper 14 Dec 2013 14:51 #615530

yeekim Topic Author Offline User Posts: 72 Thank you received: 2	Hoi! So the season for this ride is over and the chopper is "stripped" in workshop! I was wondering, why the engine made some weird noises: like 100 of loose bolts &nuts were inside That's why: Will change the primary chain to shorter one: Got some moisture in crankcase: & the oil cooler will be installed.... Greetings Ex nihilo nihil fit!
	Please Log in or Create an account to join the conversation.

KZ750 chopper 29 Apr 2014 10:11 #630808

yeekim Topic Author Offline User Posts: 72 Thank you received: 2	Hoi! So, I'm on the road again! Got the oil-cooler, new 14 tooth front sprocket, made etc. Now made a carb swap from Keihin to Mikuni with some issues www.kzrider.com/forum/3-carburetor/592454-carb-swap#630806 Made the ride a little bit higher by using rear shock extensions(+ 1") and a softer saddle. Pictures will follow. greetings Ex nihilo nihil fit!
	Please Log in or Create an account to join the conversation. Last edit: by yeekim.

KZ750 chopper 10 Oct 2014 14:49 #650281

yeekim Topic Author Offline User Posts: 72 Thank you received: 2	Hoi! This year was a crap for me Less than a 600 miles and no progress... Got rid of the low rev issue by turning the screw by 6 turns out The stage 3 jet kit will follow...... New front and rear fender are in mind, sissy bar etc.. greetings Ex nihilo nihil fit!
	Please Log in or Create an account to join the conversation.

KZ750 chopper 31 Oct 2014 00:57 #652363

yeekim
Topic Author
Offline
User
Posts: 72
Thank you received: 2

Hi!
As a season Grand Finale, made a "walk of shame" :angry:

The wireing goes insade the handlebar and RH grip was defektive, resulting short circuit and.....
So the wires are outside again with new controls.
The twin headligts were not so good at night and when opportunity presented me with 20€ KZ400 headlight and cowling, this happened:

Ity will also cover the connecttions .
Let's see

WbR

Ex nihilo nihil fit!

Please Log in or Create an account to join the conversation.

Last edit: by yeekim.

KZ750 chopper 25 Feb 2015 09:48 #662735

yeekim Topic Author Offline User Posts: 72 Thank you received: 2	Hi! So got the connections covered, new signal lights etc in place and it looks like this: Replaced the Chinese pod filters with Ramair socks : Used old pods for "base" In my climate and driving conditions, the "budget" pods mean that the cyl. and piston section will wear down in one season! Ex nihilo nihil fit!
	Please Log in or Create an account to join the conversation.

KZ750 chopper 01 Sep 2015 10:07 #688180

yeekim Topic Author Offline User Posts: 72 Thank you received: 2	Did not like the fayrings So made/baught new headlight set: Installed newE-approved(very important on right side of the bond) dayligth driving lights-only 8W total but what a difference Got rid of the tacho and installed KOSO indicators- a perfect fit Baught a jet kit from 6Sigma(?) and it's running like wbr Ex nihilo nihil fit!
	Please Log in or Create an account to join the conversation.

KZ750 chopper 25 Oct 2015 08:54 #695891

yeekim Topic Author Offline User Posts: 72 Thank you received: 2	Hi! Managed to sell the bike! It was hard to find right buyer to projects like this but I hope that the new owner is happy. I'm not totally bikeless- bought a VN15 se Ex nihilo nihil fit!
	Please Log in or Create an account to join the conversation.

KZRider, KZ, Z1 & Z Motorcycle Enthusiast's Forum

TOPIC: