TOPIC:

You're right Mark, unusually large nuts would have been a real mans answer to the problem. You're also right that I'm spoiled having a lathe and a welder, but I remember in the not too distant past doing all my fabrication with a hand drill, a file, a jigsaw, a hacksaw and a bench grinder. I just picked up some half inch plate aluminum so I'll profile a new bracket and cut it out. Hopefully I can get it finished up to the same point the prototype bracket is at this evening. Damn spoiled KZR members, especially the ones with completed projects!

You'll notice that Mark said that he would "Put on some large nuts." Just like in real life. Open the drawer and remove the unusually large nuts. Then put them on. I can hear it now "Honey have you seen my nuts?" "Yes dear, they're in the sock drawer."

Sorry, I couldn't resist.

Gives new meaning to the phrase "bolt on"

if you had a milling attachment like this

www.littlemachineshop.com/products/produ...uctID=1956&category=

then you would be unstoppable!


leon

LEON STOP IT RIGHT NOW!!
You guys are just a bunch of spoiled Ninja guys.
Your all driving me NUTS.(or my nuts)
Buy a New grinder, and file.

Don't worry Mark. Just think about all the extra money you'll have when the rent checks start rolling in. You can buy yourself a lathe and mill of your own. I'll be happy to give you some pointers. But you'll still need the grinder. First lesson, how to sharpen drills with a bench grinder.

Thanks Leon, now you've gotten Mark all worked up, but you reminded me of a joke Mark....

A guy dressed like a pirate walks into a bar with a steering wheel sticking out of his pants. the bartender asks "why's there a steering wheel sticking out of your pants buddy?" The pirate relies "Aaarrrggggghhhh, It's drivin' me nuts!"


Thanks Mark, and quit whining, we're blowing our dough on useless bike parts: you're buying income properties......boo hoo for you

porchev914 wrote:

Thanks Leon, now you've gotten Mark all worked up, but you reminded me of a joke Mark....

A guy dressed like a pirate walks into a bar with a steering wheel sticking out of his pants. the bartender asks "why's there a steering wheel sticking out of your pants buddy?" The pirate relies "Aaarrrggggghhhh, It's drivin' me nuts!"


Thanks Mark, and quit whining, we're blowing our dough on useless bike parts: you're buying income properties......boo hoo for you

Aaarrrggggghhhh, YOUR drivin' me nuts!

The right side rearset bracket #2 out of 1/2" plate. It is shown next to bracket #1 on the left which is 3/8"

Here is the bracket bolted to the frame with the rearset. This one looks much better. I will contour it a bit more, but this is close to finished. I just need to drill a hole in the bottom for the lower rearset mount. Then I can turn my attention to the left side rearset and bracket

Well done. They look great.
I really like the part about using a grinder. Very MANLY indeed. I use 1 for my fingernails.

porchev914 wrote:

This should drive you nuts a bit more Mark Using a 4 1/2" grinder, a drill press, a file, a jig saw AND a crappy milling machine I was able to make right side rearset bracket #2 out of 1/2" plate. It is shown next to bracket #1 on the left

Hey, somebody took a bite out of my porkchop! Looks good. Have you tried standing on them yet? Cutting aluminum with the jigsaw is fun, isn't it? I bet if you tried to mimic that big chamfer on the inside of the R6 rearset, then nobody would know that you made the adapters yourself.

hey i got a low buck drill press and sanding drum tech.
your bracket is looking good.
if you get(or make) a bolt or pin that will fit in the holes on your bracket,then you can grab the pin in the drill press vise sticking up so that you can pivot the bracket by hand around the pin.then put a sanding drum(or maybe something more aggressive,carbide burr or end mill perhaps)in the drill press and set the vise up so that the material is just touching the drum(while being mindfull of the rotation,so as to not get sucked in)on the side that is closest to the hole(the area with the thinnest material area)then you can turn the drill press on and slowly start feeding the material in to the drum by pivoting the material around the pin,and create perfectly radiused corners that are concentric with the bolt holes.i do this on my mill when i need some nice corners but don't want to set up the rotary table.
hope this makes sense.

leon

Clear as a bell Leon. Thanks for the tip, I'll see if I can impliment it on the left side

Great idea Josh, I'll try and figure out how to put the chamfer in symetrically I can just see Mark out in the garage with an angle grinder in his lap clearancing his fingernails You're more of a man than I am Mark. I got into a fight with my angle grinder once, and I walked away with 16 stitches (I lost), so more power to ya

porchev914 wrote:

I got into a fight with my angle grinder once, and I walked away with 16 stitches (I lost), so more power to ya

Ouch! Now thats gotta hurt.

I think that an angle grinder is second only to a chainsaw in danger to the user. It can hurt you in soo many ways. I um, set my shirt on fire with mine.

I kick myself for being too cheap to buy a grinder with a momentary on switch. In hindsight, it would have been much cheaper than the e.r. bill.
Its a good thing I don't normally use a chainsaw in my day to day fabrication

I have been slacking a bit on my project. Kids, fights with some new neighbors and lack of funding have prevented any signifigant update. I have been working on my rearset adapter brackets here and there though. These are the adapter brackets from paper template through mostly completed part

Here is the quasi complete adapter bracket mounted on the left rearset. I say quasi complete because I still plan to bevel the radius to match the R6 rearset like testerossa suggested. Great idea Josh!

That looks deadly!